Command Chanserv Services Allnetwork

1. AKICK

The AKICK command allows you to maintain channel

ban lists.  Users on the AKICK list will be

automatically kickbanned when they join the channel,

removing any matching ban exceptions first. Users

with the +r flag are exempt.

You may also specify a hostmask (nick!user@host)

for the AKICK list.

Removing an entry from the AKICK list will not

remove any channel bans placed by it.

Syntax: AKICK <#channel> ADD|DEL|LIST <nickname|hostmask>

Examples:

    /msg ChanServ AKICK #foo ADD bar

    /msg ChanServ AKICK #foo ADD foo!*@bar.com

    /msg ChanServ AKICK #foo DEL bar

    /msg ChanServ AKICK #foo LIST

2. BAN

The BAN command allows you to ban a user or hostmask from

a channel.

Syntax: BAN <#channel> <nickname|hostmask>

Examples:

    /msg ChanServ BAN #chat carnell

    /msg ChanServ BAN #chat *!*@*.ipt.aol.com

3. CLEAR BANS

Clear bans will remove all bans found in a specific

channel. If your ircd supports other lists associated

with a channel (e.g. ban exceptions), you can clear

these by specifying the mode letters. Specify an

asterisk to clear all lists.

Syntax: CLEAR <#channel> BANS [types]

Examples:

    /msg ChanServ CLEAR #support BANS

Clears #support ban list.

    /msg ChanServ CLEAR #support BANS eI

Removes all ban and invite exceptions on #support

(if your ircd supports them).

    /msg ChanServ CLEAR #support BANS *

Clears all lists of #support.

    /msg ChanServ CLEAR #support BANS +

Shows the possible letters.

4. CLEAR USERS

Clear users will kick all users out of the channel,

except you. The channel will be cycled (recreated)

if you are not on it.

If a reason is specified, it will be included in the

kick message.

Syntax: CLEAR <#channel> USERS [reason]

Examples:

    /msg ChanServ CLEAR #ChatZone USERS

5. COUNT

This will give a count of how many entries are in each of

the channel's xOP lists and how many entries on the access

list do not match a xOP value (except the founder).

The second line shows how many access entries have each flag.

Syntax: COUNT <#channel>

Examples:

    /msg ChanServ COUNT #oscn

6. DROP

DROP allows you to "unregister" a registered channel.

Once you DROP a channel all of the data associated

with it (access lists, etc) are removed and cannot

be restored.

Syntax: DROP <#channel>

Examples:

    /msg ChanServ DROP #foo

7. FLAGS

The FLAGS command allows for the granting/removal of channel

privileges on a more specific, non-generalized level. It

supports both nicknames and hostmasks as targets.

When only the channel argument is given, a listing of

permissions granted to users will be displayed.

Syntax: FLAGS <#channel>

Otherwise, an access entry is modified. A modification may be

specified by a template name (changes the access to the

template) or a flags change (starts with + or -). See the

TEMPLATE help entry for more information about templates.

If you are not the founder, you may only manipulate flags you

have yourself, and may not edit users that have flags you

don't have. For this purpose, +v grants +V, +h grants +H,

+o grants +O and +r grants +b.

If you do not have +f you may still remove your own access

with -*.

Syntax: FLAGS <#channel> [nickname|hostmask template]

Syntax: FLAGS <#channel> [nickname|hostmask flag_changes]

Permissions:

    +v - Enables use of the voice/devoice commands.

    +V - Enables automatic voice.

    +h - Enables use of the halfop/dehalfop commands.

    +H - Enables automatic halfop.

    +o - Enables use of the op/deop commands.

    +O - Enables automatic op.

    +s - Enables use of the set command.

    +i - Enables use of the invite and getkey commands.

    +r - Enables use of the kick, ban, and kickban commands.

    +R - Enables use of the recover and clear commands.

    +f - Enables modification of channel access lists.

    +t - Enables use of the topic and topicappend commands.

    +A - Enables viewing of channel access lists.

    +b - Enables automatic kickban.

The special permission +* adds all permissions except +b.

The special permission -* removes all permissions including +b.

Examples:

    /msg ChanServ FLAGS #foo

    /msg ChanServ FLAGS #foo foo!*@bar.com VOP

    /msg ChanServ FLAGS #foo foo!*@bar.com -V+oO

    /msg ChanServ FLAGS #foo foo!*@bar.com -*

    /msg ChanServ FLAGS #foo foo +oOtsi

    /msg ChanServ FLAGS #foo TroubleUser!*@*.troubleisp.net +b

8. FORCEXOP

FORCEXOP resets all channel access levels to

xOP compatible values. That is, after the

operation, the founder will have all permissions

and autoop and everyone else on with flags

will be on one of the xOP lists. This command

is useful if the definitions for which flags

each xOP level gives change and the founder

wishes to use xOP commands only.

Only the founder can execute this command.

Syntax: FORCEXOP <#channel>

See also: SOP, AOP, HOP, VOP

9. GETKEY

GETKEY returns the key (+k, password to be allowed in)

of the specified channel: /join #channel key

Syntax: GETKEY <#channel>

Examples:

    /msg ChanServ GETKEY #foo

10. HALFOP|DEHALFOP

These commands perform status mode changes on a channel.

If you perform an operation on another user, they will be

notified that you did it.

If the last parameter is omitted the action is performed

on the person requesting the command.

Syntax: HALFOP|DEHALFOP <#channel> [nickname]

Examples:

    /msg ChanServ HALFOP #foo

11. INFO

INFO displays channel information such as

registration time, flags, and other details.

Syntax: INFO <#channel>

Examples:

    /msg ChanServ INFO #foo

12. INVITE

INVITE requests services to invite you to the

specified channel. This is useful if you use

the +i channel mode.

Syntax: INVITE <#channel>

Examples:

    /msg ChanServ INVITE #foo

13. KICK

The KICK command allows for the removal of a user from

a channel. The user can immediately rejoin.

Your nick will be added to the kick reason.

Syntax: KICK <#channel>  [reason]

Examples:

    /msg ChanServ KICK #foo abuser

    /msg ChanServ KICK #foo abuser please stop

14. KICKBAN

The KICKBAN command allows for the removal of a user from

a channel while placing a ban on the user.

Any matching ban exceptions will be removed.

Syntax: KICKBAN <#channel>  [reason]

Examples:

    /msg ChanServ KICKBAN #foo abuser

    /msg ChanServ KICKBAN #foo abuser go away

15. LIST

LIST shows channels that match a given

pattern. Wildcards are allowed.

Syntax: LIST 

Examples:

    /msg ChanServ LIST #*foo*

    /msg ChanServ LIST #x*

16. OP|DEOP|VOICE|DEVOICE

These commands perform status mode changes on a channel.

If you perform an operation on another user, they will be

notified that you did it.

If the last parameter is omitted the action is performed

on the person requesting the command.

Syntax: OP|DEOP <#channel> [nickname]

Syntax: VOICE|DEVOICE <#channel> [nickname]

Examples:

    /msg ChanServ OP #foo bar

    /msg ChanServ DEVOICE #foo

17. RECOVER

RECOVER allows you to regain control of your

channel in the event of a takeover.

More precisely, everyone will be deopped,

limit and key will be cleared, all bans

matching you are removed, a ban exception

matching you is added (in case of bans Atheme

can't see), the channel is set invite-only

and moderated and you are invited.

If you are on channel, you will be opped and

no ban exception will be added.

Syntax: RECOVER <#channel>

Example:

    /msg ChanServ RECOVER #foo

18. REGISTER

REGISTER allows you to register a channel

so that you have better control. Registration

allows you to maintain a channel access list

and other functions that are normally

provided by IRC bots.

Syntax: REGISTER <#channel>

Examples:

    /msg ChanServ REGISTER #atheme

19. SET EMAIL

SET EMAIL allows you to change or set the email

address associated with a channel. This is shown

to all users in INFO.

Syntax: SET  EMAIL 

Example:

    /msg ChanServ SET #chat EMAIL some@email.address

20. SET ENTRYMSG

SET ENTRYMSG allows you to change or set

a message sent to all users joining the

channel. Specify a  of NONE to

clear the message.

Syntax: SET  ENTRYMSG 

Example:

    /msg ChanServ SET #support ENTRYMSG Welcome to #support. Please do

 not paste more than 5 lines.

21. SET FOUNDER

SET FOUNDER allows you to set a new founder

of the channel. The new founder has to

execute the same command to confirm the

transfer.

Syntax: SET <#channel> FOUNDER <newnick>

If the new founder has not yet confirmed the

transfer, you can cancel it by specifying

your own nick as the new founder.

Syntax: SET <#channel> FOUNDER <yournick>

Example:

    /msg ChanServ SET #foo FOUNDER bar

22. SET GUARD

SET GUARD allows you to have ChanServ join your channel.

Fantasy commands will only work if this is enabled.

Syntax: SET  GUARD ON|OFF

Example:

    /msg ChanServ SET #atheme GUARD ON

23. SET KEEPTOPIC

SET KEEPTOPIC enables restoration of the old

topic after the channel has become empty. In

some cases, it may revert topic changes

after netsplits or services outages, so it

is not recommended to turn this on if your

channel tends to never empty.

Syntax: SET <#channel> KEEPTOPIC ON|OFF

Example:

    /msg ChanServ SET #foo KEEPTOPIC ON

24. SET MLOCK

MLOCK (or "mode lock") allows you to enforce a set

of modes on a channel.  This can prevent abuse in cases

such as +kl. It can also make it harder to fight evil

bots, be careful. Locked modes can be seen by anyone

recreating the channel (this includes keys).

Syntax: SET <#channel> MLOCK 

Examples: (some may use modes your ircd does not support)

    /msg ChanServ SET #foo MLOCK +nt-lk

    /msg ChanServ SET #foo MLOCK +inst-kl

    /msg ChanServ SET #c MLOCK +ntk c

    /msg ChanServ SET #foo MLOCK +ntcjf-kl 2:30 #overflow

    /msg ChanServ SET #overflow MLOCK +mntF-kljf

    /msg ChanServ SET #foo1 MLOCK +ntlL 40 #foo2

    /msg ChanServ SET #foo MLOCK OFF

25. SET PROPERTY

SET PROPERTY manipulates metadata

associated with a channel.

To delete a metadata entry, specify

the name and leave the value blank.

Syntax: SET  PROPERTY  [value]

Example:

    /msg ChanServ SET #atheme PROPERTY URL http://www.atheme.org/

    /msg ChanServ SET #meat PROPERTY VEGETABLES

26. SET SECURE

SET SECURE prevents anyone that's not on the

channel's access lists from gaining operator

or halfop status on the channel.  This is

useful if you're paranoid.

Syntax: SET <#channel> SECURE ON|OFF

Example:

    /msg ChanServ SET #foo SECURE ON

27. SET TOPICLOCK

SET TOPICLOCK causes ChanServ to revert

topic changes by users without the +t flag.

Topic changes during netsplits or services

outages will always be reverted.

TOPICLOCK requires KEEPTOPIC and will

automatically enable it; disabling KEEPTOPIC

will disable TOPICLOCK also.

Syntax: SET <#channel> TOPICLOCK ON|OFF

Example:

    /msg ChanServ SET #foo TOPICLOCK ON

28. SET URL

SET URL allows you to change or set the URL

associated with a channel. This is shown

to all users joining the channel. Specify

an <url> of NONE to clear the URL.

Syntax: SET  URL <url>

Example:

    /msg ChanServ SET #chat URL http://slashdot.org

29. SET VERBOSE

SET VERBOSE ON sends a notice to the channel when someone

makes changes to the access lists.

SET VERBOSE OPS sends a notice to the channel operators when

someone makes changes to the access lists.

Syntax: SET <#channel> VERBOSE ON|OPS|OFF

Example:

    /msg ChanServ SET #foo VERBOSE ON

30. STATUS

STATUS returns information about your current

state. It will show information about your

nickname, IRC operator, and SRA status.

If the a channel parameter is specified, your

access to the given channel is returned.

Syntax: STATUS [#channel]

Example:

    /msg ChanServ STATUS

    /msg ChanServ STATUS #foo

31. TAXONOMY

The taxonomy command lists metadata information associated

with registered channels.

Examples:

    /msg ChanServ TAXONOMY #atheme

32. TEMPLATE

The TEMPLATE command allows definition of sets of flags,

simplifying the use of the FLAGS command.

Without arguments, network wide templates are shown.

These include at least SOP/AOP/HOP/VOP.

Syntax: TEMPLATE

When given only the channel argument, a listing of

templates for the channel will be displayed.

Syntax: TEMPLATE <#channel>

Otherwise, a template is modified. A modification may be

specified by a template name (copies the template) or a

flags change (starts with + or -, optionally preceded by

an !). Templates cannot be the empty set (making a

template empty deletes it).

If the ! form is used, all access entries which exactly

match the template are changed accordingly, with the

exception that it is not possible to remove the

founder's +f access.

There is a limit on the length of all templates on a

channel.

If you are not the founder, similar restrictions apply

as in FLAGS.

Syntax: TEMPLATE <#channel> [template oldtemplate]

Syntax: TEMPLATE <#channel> [template flag_changes]

Syntax: TEMPLATE <#channel> [template !flag_changes]

Examples:

    /msg ChanServ TEMPLATE #foo

    /msg ChanServ TEMPLATE #foo user VOP

    /msg ChanServ TEMPLATE #foo user !+A

    /msg ChanServ TEMPLATE #foo co-founder +*-OH

    /msg ChanServ TEMPLATE #foo op -*+vVhoti

    /msg ChanServ TEMPLATE #foo obsoletetemplate -*

33. TOPIC

The TOPIC command allows for the changing of a topic on a channel.

Syntax: TOPIC <#channel> 

Examples:

    /msg ChanServ TOPIC #foo bar

34. TOPICAPPEND

The TOPICAPPEND command allows for the addition to a topic on a

 channel.

Syntax: TOPICAPPEND <#channel> 

Examples:

    /msg ChanServ TOPICAPPEND #foo bar

35. UNBAN

The UNBAN command allows you to unban a user or hostmask

from a channel. If no nickname or hostmask is specified,

you are unbanned.

Syntax: UNBAN <#channel> [nickname|hostmask]

Examples:

    /msg ChanServ UNBAN #chat pfish

    /msg ChanServ UNBAN #chat *!*@*.ucdavis.edu

36. WHY

The WHY command shows the access entries an online

user matches.

Syntax: WHY <#channel> 

Examples:

    /msg ChanServ WHY #atheme jilles^

Source : www.allnetwork.org
www.telkomnet.blogspot.com

Related Posts by Categories